Starting a trucking company means becoming a motor carrier: a business with its own USDOT number, operating authority, insurance filing and safety records. For one truck hauling general freight, our worked budget comes to about $64,000 in cash if you finance a used tractor. Only about $4,100 of that is registration and compliance. FMCSA then audits your records within 12 months of your USDOT number, and any one of 16 specific violations fails you automatically.
This hub takes the job in the order you would do it. Each step says what to decide and which guide to read next, so you can read straight down or jump to the step you have reached.
This is general information, not legal, tax or financial advice. The figures assume one tractor-trailer, general freight with no hazmat, and interstate work. Hazmat, passengers, household goods and intrastate-only operations have extra or different rules, and budgets for hotshot rigs and box trucks don’t transfer.
Step 1: Choose your route
You have two ways to run your own truck. Leased on, you haul under a carrier’s USDOT number and authority, and it usually supplies the primary liability filing and the loads. With your own authority, you are the carrier: your customers and rates, plus every cost and compliance job on this page. Many people lease on first to learn freight pricing and cash flow, then file for their own authority once they have savings and a clean record.
Look at the money before you decide. Our guide to how owner-operators work and what they earn runs a full year at ATRI’s 2025 averages: $2.08 a mile from a carrier leaves about $66,000 before tax and benefits, which is less than a fleet’s average driver package at the same miles. It also goes through a lease clause by clause. 49 CFR 376.12 makes a carrier put the terms in writing, but it does not set a minimum rate or guarantee miles. Before you sign, our guide to what federal rules require in an owner-operator lease takes Part 376 clause by clause: pay, every charge-back, escrow, and payment within 15 days of turning in your paperwork.
One thing to avoid: a carrier-run lease-purchase program. A federal task force told Congress in January 2025 to ban them, and its data, which it says is limited, suggests that fewer than 1 in 100 drivers who enter one end up owning the truck.
Pick your equipment and freight
What you haul decides the truck, the trailer and some of the rules. The weight rating on the door label matters most: it sets whether you need a CDL, which insurance minimum applies, and whether IFTA and IRP apply. Each of these guides covers one kind of work:
- Hotshot trucking: a heavy-duty pickup or medium-duty truck pulling a flatbed. Federal rules have no “hotshot” category, so the guide works through the 10,001 lb and 26,001 lb lines, insurance and a cost-per-mile example.
- Starting a box truck business: a single two-axle box truck rated 26,000 lb or less needs no CDL, IFTA, IRP plates or Form 2290, but for-hire work across state lines still needs authority, $750,000 in liability cover and the safety audit.
- Dry van trucking: the enclosed, unrefrigerated 53 ft trailer for boxed and palletized freight that needs no temperature control, with the federal size and weight limits and how van loads are paid.
- Reefer trucking: refrigerated trailers with their own diesel unit, the FDA’s Sanitary Transportation rule for food, and how reefer fuel is taxed.
- Flatbed trucking: open-deck trailers from step decks to conestogas, and the federal cargo securement rules the driver must meet on every load.
- Drayage: short container moves between a port or rail terminal and a nearby warehouse, priced per move, with TWIC cards, interchange agreements and terminal free time.
Step 2: Build the budget
The money goes on the truck, the insurance down payment and, above all, the cash to run until invoices start to pay. These are the four budgets from our guide to what it costs to start a trucking company, for a January 2027 start:
| Route | Cash to start | Monthly cost, before you pay yourself |
|---|---|---|
| Lease onto a carrier, financed used tractor | About $30,000 | About $9,900 |
| Own authority, financed used tractor | About $64,000 | About $10,900 |
| Own authority, older tractor bought outright | About $94,000 | About $9,800 |
| Own authority, financed new tractor | About $100,000 | About $13,500 |
Several lines in those budgets are our own assumptions, including insurance, plates and the trailer, and the guide marks each one so you can swap in real quotes. The largest line in the financed used budget is the reserve: two months of truck and living costs, about $30,000.
On funding, ignore pages that promise free money. The SBA says plainly that it does not provide grants for starting a business. Most new carriers use savings plus equipment finance, and SBA microloans go up to $50,000.
Step 3: Get your authority and insurance
Our step-by-step guide to the whole startup is the core read of this hub, covering all 10 steps. The order matters: form the business, get a free EIN, and collect insurance quotes before you apply. A new authority has no loss history, so a quote can take longer than the filing.
Then apply in Motus, FMCSA’s registration system, for a USDOT number and operating authority, which costs $300 per authority type. Once FMCSA publishes your application, you have 20 days to get two filings on record: your insurer’s proof of cover, and a BOC-3 naming your process agents. Our MC number guide explains what you receive and how long it takes. MC numbers still exist in 2026, whatever older pages say. If you also want to broker freight, that is a separate $300 application and a different path, covered in our getting licensed hub.
Three insurance guides sit behind this step:
- Trucking liability minimums and filings: the $750,000 federal floor for general freight, how the filing works, and what cargo and physical damage cover add. Federal law doesn’t require cargo cover for general freight, but brokers and shippers usually do.
- Comparing trucking insurers on public data: what FMCSA filings and financial ratings can tell you about your quotes. New authorities tend to be written by a short list of insurers, and no public data shows who will price your truck lowest.
- Non-trucking liability for leased drivers: if you lease on, this is the cover carriers often write into the lease. No federal rule requires it, and “off dispatch” does not always mean covered.
Step 4: Set up compliance before the first load
The startup guide covers each of these jobs in full.
- Drug and alcohol testing. If you drive your own truck, you are both employer and driver, and 49 CFR 382.103 bars a random pool of one. In practice you join a consortium, pass a pre-employment test and register in the Clearinghouse before you drive.
- UCR. An annual registration: $46 for 2026 and $55 for 2027 at one or two trucks.
- IRP plates and an IFTA license from your home state. IFTA means a quarterly fuel tax return, so keep every fuel receipt and your miles by state from the first load.
- Form 2290 if the truck is 55,000 lb or more, up to $550 for a full year. Your state will usually want the stamped Schedule 1 for plates.
- An ELD from FMCSA’s registered list, a driver qualification file (yes, for yourself) and an annual inspection for the truck and trailer.
Step 5: Plan for the safety audit
Every new carrier is a “new entrant” for 18 months. FMCSA’s audit generally comes after at least 3 months of operation and, for a property carrier, within 12 months of receiving your USDOT number. The automatic failures are listed in 49 CFR 385.321. They include having no testing program, being outside a random pool, and any lapse in your required insurance. A general freight carrier that fails has 60 days to show corrective action, or its registration is revoked and it is placed out of service.
Keep one binder, paper or digital, from your first load, and do a mock audit in your second month. The startup guide has the failure list in plain English, a 90-day plan and a document checklist.
Step 6: Find freight and manage cash
Most new carriers start with freight brokers through load boards, then add direct shippers over time. So learn what a freight broker does and how it gets paid. Before you haul for one, use our walkthrough for looking up an MC number to confirm its authority and bond are on file.
- Paperwork. Get every load in writing on a rate confirmation, and keep a signed bill of lading for every delivery. Our free bill of lading form and guide goes through it box by box.
- Pricing. Price every load on your own cost per mile, including empty miles. ATRI puts non-tank empty miles at 16.5%. On LTL and partial loads, our freight class calculator shows how density sets the class.
- Cash flow. Fuel and repairs are paid now, while a broker may pay 30 days after delivery. That gap is how a fully booked carrier can run out of money in months two and three. Freight factoring and its contract traps explains one way to close it, for a fee commonly quoted at about 2% to 5% of the invoice.
- Help finding loads. If you hire someone, know where a truck dispatcher’s legal line falls. Under FMCSA’s guidance, a dispatcher who chooses which of several carriers gets a load, or takes pay from the broker or factor, should have broker authority.
When to wait
Trucking margins are thin. ATRI’s truckload respondents averaged a 0.4% operating margin in 2025, so buying a truck is no automatic raise. You need an edge: more miles, lower costs, better freight or a specialty. If your main reason is a recruiter’s big gross number, you have no savings, or your only way in is a lease-purchase, the better first step is company driving with a savings plan or the lease-on route.
Every figure on this page comes from the guides linked above, which were fact-checked against primary sources between 31 October and 14 November 2026. Budget figures are our own worked estimates, not quotes. This page is general information, not legal, tax or financial advice.



